PXS703型铜片腐蚀测定仪
PXS703型石油产品铜片腐蚀试验器适用于GB/T5096、ISO2160、ASTM D130、IP154《石油产品铜片腐蚀试验法》测定航空汽油、喷气燃料、车用汽油或具有雷氏蒸气压不大于124Kpa（900mmHg）的其它烃类、溶剂油、柴油、镏分燃料油、润滑油和其它石油产品对铜的腐蚀程度。智能测控系统，轻触键设定，高亮度LCD点阵中文显示。仪器中应用了本公司传统的金属浴加热方式，用户再也不必为水和油的蒸发等使用中的麻烦而烦恼；
主要功能
1、操作参数用键盘设定；
2、智能测控系统，轻触键设定，高亮度LCD点阵中文显示；
3、试验浴用精确温度控制的金属浴；
4、铜片腐蚀试验时间可以设定与报警；
5、测控系统有自诊断功能；
技 术 指 标
1、金属恒温浴控制范围:室温-200℃；
2、控温精度：±0.05℃；
3、温度梯度: ±0.01℃；
4、加热功率：1200W；
5、金属恒温浴能承受 0.7Mpa 试验压力；
6、自动定时时间：0～99小时内任意设置，最小每秒计时（键盘设定，增量 1 min）。
7.电源电压：AC220V±10% 50Hz
8.环境温度:0℃-40℃
9.相对湿度:<>
PXS703 type copper strip corrosion tester
PXS703 type petroleum product copper sheet corrosion tester is applicable to GB/T5096, ISO2160, ASTM D130, IP154 "Petroleum product corrosion test method for petroleum products" to determine aviation gasoline, jet fuel, motor gasoline or has a Rayleigh vapor pressure of not more than 124Kpa ( The degree of corrosion of copper by other hydrocarbons, mineral spirits, diesel oil, diesel fuel oil, lubricating oil and other petroleum products of 900 mmHg). Intelligent measurement and control system, touch key setting, high brightness LCD dot matrix Chinese display. The companys traditional metal bath heating method is applied in the instrument, and the user no longer has to worry about the trouble of using water and oil evaporation;
The main function
1. The operating parameters are set with the keyboard;
2, intelligent measurement and control system, touch key setting, high brightness LCD dot matrix Chinese display;
3. The test bath uses a precise temperature controlled metal bath;
4, copper corrosion test time can be set and alarm;
5. The measurement and control system has a self-diagnosis function;
Technical indicators
1, metal thermostat.disabledic bath control range: room temperature -200 ° C;
2. Temperature control accuracy: ±0.05 °C;
3. Temperature gradient: ±0.01 °C;
4, heating power: 1200W;
5, metal thermostat.disabledic bath can withstａnd 0.7Mpa test pressure;
6, automatic timing: arbitrarily set within 0 ~ 99 hours, the minimum time per second (keyboard settings, increments of 1 min).
7. Power supply voltage: AC220V±10% 50Hz
8. Ambient temperature: 0°C-40°C
9. Relative humidity: <>
