多个皮带秤传感器的组合注意事项
来源:南京天光电气科技有限公司
2025年04月24日 07:48
分享
function share(types) {
var title, imageUrl, url, description, keywords;
//获取文章标题
title = document.title;
//获取隐藏域中的图片地址
try {
imageUrl = document.getElementById("shareimg").innerHTML;
catch (e) {
imageUrl = "";
//假如图片为空获取网页中的第一张图片地址作为分享图
if (imageUrl == "") {
try {
imageUrl = document.images[0].src;
catch (e) {
imageUrl = "";
//获取当前网页url
url = document.location.href;
url = url.replace("html#", "html");
try {
//获取网页描述
description = document.querySelector('meta[name="description"]').getAttribute('content');
catch (e) {
description = "";
try {
//获取网页关键字
keywords = document.querySelector('meta[name="keywords"]').getAttribute('content');
catch (e) {
keywords = "";
//qq空间接口的传参
if (types == 'qzone') {
window.open('https://sns.qzone.qq.com/cgi-bin/qzshare/cgi_qzshare_onekey?url=' + url + '&title=' + title + '&pics=' + imageUrl + '&summary=' + description);
//新浪微博接口的传参
if (types == 'weibo') {
window.open('http://service.weibo.com/share/share.php?appkey=583395093&url=' + url + '&title=' + title + '&pic=' + imageUrl);
// //qq好友接口的传参
// if (types == 'qqim') {
// window.open('http://connect.qq.com/widget/shareqq/index.html?url=' + url + '&title=' + title + '&pics=' + imageUrl + '&summary=' + description + '&desc=' + keywords);
//
//生成二维码给微信扫描分享
if (types == 'weixin' || types == 'qqim') {
//在线二维码(服务器性能限制,仅测试使用,屏蔽非大陆ip访问)
// url = url.replaceAll("-", "%2D");
url=url.replace(/-/g, '%2D')
window.open('https://www.a-bm.cn/share.aspx?types=' + types + '&url=' + url);
多个皮带秤传感器的组合安装问题是需要注意的,由于皮带秤传感器安装直接影响称重传感器精度和使用年限,不准确的安装不仅会导致测量的误差,而起长期错误的使用方法必定会导致皮带秤传感器的使用产生质的变化。除应合理选定称重传感器的负荷和正确安装外,多个皮带秤传感器组合还应注意:
1,应在各皮带秤传感器两旁加装固定支柱和千斤顶支架。固定支柱的高度应略低于传感器高度3mm到4mm,以便需要更换或维护传感器时,利用千斤顶将秤体顶起,再在固定支柱上塞进适当厚度的垫铁,使传感器与支架脱开4mm到5mm,作为临时支撑另一方面当秤体超载时,起到保护传感器的作用。
2,为防止秤体因冲击等原因而引起水平方向运动应根据秤体的结构形式加装适当的限位器。限位器安装时不应在垂直方向上施加任何力,但能抵消作用在秤体上的各种水平力。
3,皮带秤传感器须安装在水平面上,在有载荷时也须保持水平,以防因倾斜而导致载荷分配不均而损坏传感器。